Skip Navigation

University at Buffalo - The State University of New York
  1. About
    1. Contact Us
    2. News, Alerts and Tips
  2. EH&S Programs
    1. Accident Reporting
    2. Asbestos and Lead
    3. Battery Recycling
    4. Biological Safety
    5. Chemical Safety
    6. Construction Safety
    7. Environmental Protection
    8. Fire and Life Safety
    9. General Safety
    10. Hazardous Waste
    11. Industrial Hygiene
    12. Laboratory Safety
    13. Public Health
    14. Radiation Safety
    15. EH&S Projects
    16. Small Claims
  3. Policies
    1. Building Evacuation Plans
    2. Campus Commitment to Safety
    3. Corridor Use Policy
    4. Excavation Marking and Dig Safely Procedure
    5. Guidelines for Drain Disposal of Lab Waste
    6. Lab Facilities & Equipment Servicing Release
    7. Outdoor Projects
    8. More...
  4. Forms
    1. Biosafety Forms
    2. Chemical Safety Forms
    3. Equipment Release Certification Form
    4. Fact Sheets
    5. Fire Safety Forms
    6. Hot Work Permit
    7. Laser Registration
    8. Material Safety Data Sheets
    9. Radiation Safety Forms
    10. Small Claims Incident Report Form
  5. Training
    1. Radiation Safety Training
    2. Lab Safety Training
    3. Right-to-Know Training

Home > Departments > Environment, Health & Safety > EH&S Programs > Radiation Safety > Choosing a Survey Meter

Choosing a Survey Meter

Portable survey instruments can be very useful in aiding workers in locating radioactive contamination. However, the type of detector (or probe) must be chosen according to the kind of radioactive material that is being used. Generally, thin window Geiger-Mueller (GM) probes are best suited to detect beta radiation with energies above 70 keV while sodium iodide (NaI) scintillators are best for gamma radiation. 

For campus laboratories, EH&S recommends the Ludlum Model 3 survey instrument. The Model 3 has the following detectors available:

For Beta Radiation

If you are using P-32, Ca-45, Cl-36, C-14 or S-35 use the Ludlum Model 3 Survey Meter with Model 44-9 "Pancake" GM Probe. This instrument has a flat detector (1.75" in diameter) at the end of a handle. This style probe is comfortable to handle and is best suited for surveying large areas, such as floors, hoods and bench tops.

For Gamma Radiation

If you are using I-125 or other nuclides with gamma energies between 10 to 40 keV, use the Ludlum Model 3 survey meter with Model 44-3 "Low Energy Gamma" Sodium Iodide (NaI) detector.

If your are using Cr-51, I-131, Co-57 or other nuclides with gamma energies above 40 keV, use the Ludlum Model 3 survey meter with Model 44-2 "High Energy Gamma" NaI detector.

Ordering Information

When ordering the Model 3, you must specify the 0 - 5000 cpm meter face and a MHV detector connector (type UG-932/U). This will make your instrument compatible with similar instruments on campus and easier for us to calibrate.

The address of the area sales representative is:
John Anderson, Jr.
Atlantic Nuclear
1020 Turnpike St. #9
Canton, Massachusetts 02021
Telephone: (800) 878-9118; (781) 828-9118
FAX: (781) 828-1319

Web: www.atnuke.com

Please let us know when your instrument arrives so that it can be added to our calibration schedule.